CrossFlow™ (Industrial / Sea Water)
Hydroflux Industrial’s CrossFLOW™ Solids Separators are designed, specifically for industrial mining and high salinity applications. Including Anodisers, glass factories, tunnel construction, groundwater treatment, galvanizing plants, general industrial manufacture, steel, precious metal and mining.
With over 60 years of design and commissioning expertise, you can be assured that your Hydroflux CrossFlow™ Solids Separator will perform consistently with a long service life.
All Hydroflux CrossFlow™ Solids Separators are fabricated from 100% stainless steel. This includes the body, weirs, plates, plate frames and hopper.
Find out more
- High Effective Surface Area
- Non-clog Crossflow Lamella Plate Configuration
- Chemically Resistant Design
- 60° 20mm Plate Spacing as Standard
- All Stainless Steel Construction
- 60° Sludge Hopper Angle
Industrial and Mining
- Primary solids and precipitate removal
- Secondary clarification
- Tertiary clarification
- Raw water clarification
- Corrosive applications
Seawater Desalination
- Primary Settlement
- Backwash water recovery
- Lime softening
The CrossFlow™ Solids Separator range is available in the following standard sizes:
Model | Plate Area* | Flow Rate** |
CS5 | 6.1m2 | 5.0kL/hr |
CS10 | 11.5m2 | 10.0kL/hr |
CS20 | 20.9m2 | 20.0kL/hr |
CS30 | 31.3m2 | 30.0kL/hr |
CS40 | 41.7m2 | 40.0kL/hr |
CS60 | 62.6m2 | 60.0kL/hr |
CS80 | 84.6m2 | 80.0kL/hr |
* Plate Area Projected @ 60°
** Flowrate Subject to Application